No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking AP Running Statistics

Checking AP Running Statistics


After AP online and management AP configurations are complete, run the following commands in any view to check AP running statistics.


  • Run the display ap run-info { ap-name ap-name | ap-id ap-id } command to check AP running information.
  • Run the display ap performance statistics { ap-name ap-name | ap-id ap-id } command to check AP performance statistics.
  • Run the display radio { all | ap-group ap-group-name | ap-name ap-name | ap-id ap-id } command to check AP radio information.
  • Run the display ap asyn-message err-info { all | ap-name ap-name | ap-id ap-id } command to check records about AP restart failures.
  • Run the display ap uncontrol all command to check unauthorized APs.
  • Run the display channel switch-record { all | ap-name ap-name radio radio-id | ap-id ap-id radio radio-id | reason reason } command to check channel switching records.
  • Run the display ap traffic statistics wireless { ap-name ap-name | ap-id ap-id } radio radio-id [ ssid ssid ] command to check packet statistics on an AP radio.
  • Run the display ap elabel { ap-name ap-name | ap-id ap-id } command to check AP electronic label information.
  • Run the display ap port { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac } command to check the AP port status and traffic information.
  • Run the display distribute-ap { all | ap-id ap-id | ap-mac ap-mac | ap-name ap-name | central-ap-id central-ap-id | central-ap-mac central-ap-mac | central-ap-name central-ap-name } command to check RU information.
  • Run the display ap statistics command to check statistics on the types of APs added to an AC.
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160575

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next