No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding WLAN Security Policies

Understanding WLAN Security Policies

Four WLAN security policies are available: Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, WLAN Authentication and Privacy Infrastructure (WAPI). Each security policy has a series of security mechanisms, including the link authentication mechanism used to establish a wireless link, user authentication mechanism used when users attempt to connect to a wireless network, and data encryption mechanism used during data transmission.

Carriers can combine WLAN security policies with port authentication to enhance security of wireless users. Port authentication methods include 802.1X authentication, MAC address authentication, and Portal authentication. For details about the authentication methods, see NAC Configuration (Unified Mode).

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160369

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next