No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Transparent Transmission of Bluetooth Data (With No Tablet Kiosk Installed)

Configuring Transparent Transmission of Bluetooth Data (With No Tablet Kiosk Installed)

Context

In smart shopping guide sub-scenarios with no tablet kiosk installed, BLE broadcast packets sent by BLE labels are received by built-in Bluetooth modules of APs and then sent to the host computer through the Ethernet.

To ensure that APs can receive BLE broadcast packets sent by BLE labels and send the packets to the host computer, enable the Bluetooth data transparent transmission function for the APs, and configure the destination host computer and port number for the APs to report Bluetooth data transparent transmission packets.

Perform the following operations on the AC to configure an AP to go online.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run ble-profile name profile-name

    A BLE profile is created.

    By default, no BLE profile is created.

  4. Run sniffer enable transparent-mode

    The Bluetooth data transparent transmission function is configured for the built-in Bluetooth modules of APs.

    By default, the Bluetooth function of an AP's built-in Bluetooth module is disabled.

  5. Run report enable

    The APs are enabled to report Bluetooth data transparent transmission packets.

    By default, an AP is disabled from sending Bluetooth packets.

  6. Run report-mode { immediate | periodic [ interval interval ] }

    The mode and interval for APs to send Bluetooth packets.

    By default, an AP sends Bluetooth packets at an interval of 10 seconds.

    APs are configured to report Bluetooth packets immediately or at an interval of less than 5 seconds. This is because when a commodity is picked up multiple times within 5 seconds, the BLE label bound to it is considered only being picked up once.

  7. Run report-to-server ip-address ip-address port port-num [ via-ac ac-port ac-port-num ]

    The destination IP address and port number are configured for APs to report Bluetooth data transparent transmission packets.

    By default, no destination IP address or port number is configured for APs to report Bluetooth packets.

  8. Run quit

    Return to the WLAN view.

  9. Enter the AP view or AP group view.

    • Run the ap-group name group-name command to enter the AP group view.
    • Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.

  10. Run ble-profile profile-name

    The BLE profile is bound to an AP group or an AP.

    By default, no BLE profile is bound to an AP group or AP.

Verifying the Configuration

  • Run the display ble-profile { all | name profile-name } command to check configuration and reference information about the BLE profile.

  • Run the display wlan ble global configuration command to check the global configuration of BLE devices.

  • Run the display references ble-profile name profile-name command to check reference information about the BLE profile.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 159370

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next