No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of the Education IoT Solution - Student Health and Safety

Overview of the Education IoT Solution - Student Health and Safety

Scenario Overview

At schools, students' health and safety always attract attention of the schools and parents. Monitoring and query for students' health and safety information are strongly needed.

To meet these requirements, Huawei offers the Student Health and Safety Internet of Things (IoT) Solution. This solution allows schools and parents to monitor and query health and safety information about students, including the time when they enter and leave schools.

Solution Benefits

This solution brings the following benefits:
  • It supports monitoring of students' physical health data and information such as heart rate, pace, and duration of sleep through student wristbands. Student wristbands can also record the time when they enter and leave schools. Big Data statistics and analytics can then be performed on the data, so that effective measures can be taken in time against abnormal situations.
  • A WLAN can be reused as the student health and safety IoT network to achieve network integration, reduce network deployment and maintenance costs, and help administrators manage the network.

Network Architecture

As shown in Figure 25-1, the network architecture consists of the terminal layer, access layer, network layer, and application layer.

Figure 25-1  Network architecture
  • Terminal layer

    Student wristbands are deployed at this layer.

  • Access layer

    IoT APs and radio frequency identification (RFID) cards built in the IoT APs are deployed at this layer.

  • Network layer

    Network devices such as ACs and switches are deployed at this layer.

  • Application layer

    A server is deployed at this layer for managing student health and safety information ("server" for short hereinafter).

Related Products

Table 25-1  Related products

Device

Function

Vendor

AP

Provides slots for RFID cards to connect to the WLAN.

Huawei

Only the AP4050DN-E and AP7052DN can be used.

AC

Manages APs, delivers configurations to them, and works together with them.

Huawei

Switch

It is used to build a networking structure and forward packet data on the network.

Huawei

RFID card Receives health data and information from student wristbands and reports the data to the server. Telpo
Student wristband Collects, records, and reports health and safety data and information about students, including the time when they enter and leave schools. Telpo
Server Parses and processes data and information reported from student wristbands, and sends the parsed data to a health platform. Telpo
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 161480

Downloads: 446

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next