No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Mesh Whitelist

Configuring a Mesh Whitelist

Context

To prevent a trackside AP from connecting to the vehicle-mounted AP along a different track from the trackside AP, you need to add the MAC address of the vehicle-mounted AP along the local track to Mesh whitelists of all trackside APs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run mesh-whitelist-profile name whitelist-name

    A Mesh whitelist profile is created, and the Mesh whitelist profile view is displayed.

    By default, no Mesh whitelist profile is available in the system.

  4. Run peer-ap mac mac-address

    MAC addresses of neighboring APs that are allowed to connect to an AP are added to the Mesh whitelist profile.

    By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.

    NOTE:

    When configuring vehicle-ground fast link handover, add MAC addresses of vehicle-mounted APs allowed to connect to a trackside AP to a whitelist.

  5. Run quit

    Return to the WLAN view.

  6. Enter the radio view.

    • Enter the AP group radio view.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the radio radio-id command to enter the radio view.
    • Enter the AP radio view.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the radio radio-id command to enter the radio view.

  7. Run mesh-whitelist-profile whitelist-name

    The Mesh whitelist profile is bound to the AP radio.

    By default, no Mesh whitelist profile is bound to an AP radio.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 146538

Downloads: 421

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next