No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Security Profile

Security Profile

You can configure WLAN security policies to authenticate identities of wireless terminals and encrypt user packets, protecting the security of the WLAN and users. The supported WLAN security policies include open system authentication, WEP, WPA/WPA2-PSK, WPA/WPA2-802.1X, WAPI-PSK, and WAPI-certificate. You can configure one of them in a security profile. Open system authentication and WPA/WPA2-802.1X need to be configured together with NAC to manage user access.

To connect a STA to the WLAN, bind the security profile to a VAP profile. The STA can connect to the WLAN through an SSID only after it completes identity authentication according to the security policy configured in the VAP profile. For the detailed configuration, see Configuring a WLAN Security Policy.

For WDS services, bind the security profile to the WDS profile. To ensure WDS security, set the security policy to WPA2+PSK+AES. For the detailed configuration, see Configuring a Security Profile.

For Mesh services, bind the security profile to the Mesh profile. To ensure Mesh security, set the security policy to WPA2+PSK+AES. For the detailed configuration, see Configuring a Security Profile.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 161527

Downloads: 446

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next