No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring N+1 Backup

Configuring N+1 Backup

Context

N+1 backup allows multiple ACs to share one standby AC, which reduces AC purchase costs.

Pre-configuration Tasks

Before configuring N+1 backup, configure basic WLAN services on the active and standby ACs (For details, see WLAN Service Configuration).

Configuration Procedure

The following configuration tasks can be performed in any sequence. Enabling N+1 Backup is performed after all configuration tasks are complete.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 127674

Downloads: 383

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next