No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Medical Asset Management

Medical Asset Management

The implementation of medical asset management is similar to that of infant abduction prevention. The difference is that RFID tags are attached to assets. Both infant security tags and RFID tags have 433 MHz and 125 kHz radio modules. Similar to the infant abduction prevention system, the medical asset management system locates assets by identifying locations of exit monitors.
  1. RFID tags are attached to medical assets to uniquely identify them.
  2. When assets approach exit monitors at entrances/exits, 125 kHz radio modules of RFID tags receive Beacon frames sent by the exit monitors.
  3. Through 433 MHz radio modules, the RFID tags send RFID tag IDs and received exit monitor information to RFID receivers.
  4. The RFID receivers then forward the received information to the medical asset management system through APs and upstream Ethernet links.
  5. The medical asset management system matches the received information such as exit monitor IDs with the preset location information about the exit monitors, and then identifies asset locations. This system enables regional location of assets and real-time monitoring of asset locations.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 158903

Downloads: 436

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next