No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Information About Wi-Fi Tag Location

Checking Information About Wi-Fi Tag Location

Context

After the AP that has WLAN location enabled successfully receives the configuration information, it replies a response packet. You can run the display command to check information about LBS statistics and APs that have successfully received tag information.

Procedure

  • Run the display wlan location config-info aeroscout { ap-id ap-id | ap-name ap-name } command to check LSB information of the AP that has successfully received tag information.
  • Run the display wlan location statistics aeroscout command to check the LBS statistics about AeroScout tags and MUs.

    NOTE:

    If APs are configured to report AeroScout tag and MU packets to the AeroScout location server directly but not through an AC, the display wlan location statistics aeroscout command cannot display location statistics, and all fields are displayed as "0".

  • Run the display wlan location device-info tag { all | ap-id ap-id | ap-name ap-name } command to check tag location information on the AP.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160748

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next