No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical Application of Uninterrupted AP Operation After CAPWAP Link Disconnection

Typical Application of Uninterrupted AP Operation After CAPWAP Link Disconnection

As shown in Figure 4-32, to reduce management and maintenance costs, some small- and medium-sized enterprises deploy the AC at the headquarters to manage the APs and STAs in branches. In direct forwarding mode, service holding upon CAPWAP link disconnection is configured. After the CAPWAP link between the AP and AC is broken, online branch users can access local network resources (such as the local servers), and new branch users can still access the WLAN to obtain network resources.

Figure 4-32  Uninterrupted AP operation after CAPWAP link disconnection

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160679

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next