No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Inter-AC Roaming

Configuring Inter-AC Roaming

Multiple ACs are required on medium and large WLAN networks to meet the coverage requirements. When a STA roams between different ACs, services are not interrupted.

Pre-configuration Tasks

Before configuring intra-central AP roaming, configure basic WLAN services and perform the following configurations on the APs:

  • Associate the APs to different ACs.
  • Configure the same security policy.
  • Set the same SSID.
  • If NAC is configured on ACs, ensure that all ACs engaged in roaming are configured with the same authentication and authorization policies and deliver the same authentication and authorization policies to all APs.

Configuration Procedure

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160298

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next