No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Bluetooth Location

Default Settings for Bluetooth Location

Table 18-2  Default settings for Bluetooth location

Parameter

Default Setting

Bluetooth broadcast function

Disabled

Interval for sending BLE broadcast frames

500 ms

Content of a BLE broadcast frame

The UUID, Major, and Minor fields in a BLE broadcast frame are null. The default RSSI calibration value is -65 dBm.

Transmit power of an AP's built-in Bluetooth module

0 dBm

Bluetooth monitoring function

Disabled

Low power alarm threshold for BLE devices

20%

Monitoring list of BLE devices

Unconfigured

Bluetooth tag location function

Disabled

Bluetooth data transparent transmission function

Disabled

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 146382

Downloads: 421

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next