No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Security Profile

Configuring a Security Profile


You need to configure a security profile and a security policy for the WDS to ensure security. The WPA2+PSK+AES security policy is recommended for a WDS security profile. For details about WPA2, PSK, and AES, see WLAN Security Configuration.

By default, the system provides the WDS profile default. By default, the security profile default-wds with the security policy WPA2+PSK+AES and the security key huawei_secwds is referenced by a WDS profile regardless of whether the WDS profile is the default profile provided by the system or a WDS profile created by users. If the default security profile default-wds is used, you are advised to change the security key of the profile to ensure security.


  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run security-profile name profile-name

    A security profile is created, and the security profile view is displayed.

    By default, security profiles default, default-wds, and default-mesh are available in the system.

  4. Run security wpa2 psk { pass-phrase | hex } key-value aes

    A security policy is configured for the security profile.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 200079

Downloads: 507

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next