No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Function of Quickly Disconnecting STAs

Configuring the Function of Quickly Disconnecting STAs

Pre-configuration Tasks

Before configuring this function, complete the following task:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run rrm-profile name profile-name

    The RRM profile view is displayed.

  4. Run undo smart-roam quick-kickoff-threshold disable

    The function of quickly disconnecting STAs is enabled.

    By default, the function of quickly disconnecting STAs is enabled.

  5. (Optional) Run smart-roam quick-kickoff-threshold { check-snr | check-rate } *

    The mode for triggering the function of quickly disconnecting STAs is specified.

    The default mode for triggering the function of quickly disconnecting STAs is check-snr.

  6. (Optional) Run smart-roam quick-kickoff-threshold { snr snr-threshold | rate rate-threshold }

    The threshold for quickly disconnecting STAs is specified. The function of quickly disconnecting STAs is configured to allow the STAs to connect to or roam to another AP with stronger APs.

    By default, the SNR-based threshold for quickly disconnecting STAs is 15 dB, and the rate-based threshold is 20%.

  7. (Optional) Run smart-roam quick-kickoff-snr check-interval check-interval

    The interval for checking the SNR to determine whether to quickly disconnect STAs is specified.

    The default interval for checking the SNR to determine whether to quickly disconnect STAs is 500 ms.

  8. (Optional) Run smart-roam quick-kickoff-snr p-n criteria observe-time observe-value qualify-time qualify-value

    The PN threshold for quickly disconnecting STAs is specified.

    By default, the number of PN observation times is 6, and the number of PN observation times criteria are met is 4.

  9. Run quit

    Return to the WLAN view.

  10. Bind the specified RRM profile to a radio profile.
    1. Run the radio-2g-profile name profile-name or radio-5g-profile name profile-name command to enter the 2G or 5G radio profile view.
    2. Run the rrm-profile profile-name command to bind the RRM profile to the 2G or 5G radio profile.
    3. Run the quit command to return to the WLAN view.
  11. Bind the radio profile to an AP group or a specific AP. For the detailed procedure, see Binding a Radio Profile.

Verifying the Configuration

  • Run the display rrm-profile name profile-name command to check the configuration about the function of quickly disconnecting STAs.
  • Run the display radio-2g-profile name profile-name command to check the RRM profile bound to the 2G radio profile.
  • Run the display radio-5g-profile name profile-name command to check the RRM profile bound to the 5G radio profile.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 109808

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next