No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Mesh

Default Settings for Mesh

Table 14-5 lists the default settings for Mesh.

Table 14-5  Default settings for Mesh

Parameter

Default Setting

Security profile bound to a Mesh profile

default-mesh

Mesh ID of a Mesh profile

HUAWEI-WLAN-MESH

Mesh role

mesh-node

Default Mesh profile

default

Mesh whitelist profile

None

Maximum number of Mesh links that can be established on an MP

8

NOTE:
A maximum of 32 Mesh links can be established on an MP after the FWA mode is enabled.

Minimum RSSI of a Mesh link

-75 dBm

NOTE:
The minimum RSSI of a Mesh link is fixed as -90 dBm after the FWA mode is enabled.

Interval at which an MP reports Mesh link information to an AC

30s

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160593

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next