No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BLE Profile

BLE Profile

  • Bluetooth terminal location technology uses Bluetooth Low Energy (BLE) devices and a location system to locate Bluetooth terminals through the iBeacon protocol. An AP with a built-in Bluetooth module collects information about BLE devices and sends the information to a server through an AC. The server sends data about maps and BLE device locations to a Bluetooth terminal through an app server. The Bluetooth terminal then works with the location app to calculate its own location. Alternatively, the AP collects information carried in Bluetooth terminal location packets and sends the information to the AC or location server for server-side location.
  • Bluetooth tag location technology uses Bluetooth tags and a location system to locate Bluetooth tags through the BLE protocol. An AP with a built-in Bluetooth module collects information about Bluetooth tags and sends the information to a location server to locate the Bluetooth tags. The AP also monitors battery power of Bluetooth tags and checks whether Bluetooth tags are disconnected.
  • Bluetooth data transparent transmission technology is used to enable an AP with a built-in Bluetooth module to collect data from Bluetooth clients (such as Bluetooth thermometers, blood pressure monitors, and heart rate monitors) and upload the data to a server.

For the detailed configuration, see Configuring Bluetooth Location.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 147775

Downloads: 425

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next