No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the AP Configuration

Verifying the AP Configuration

Procedure

  • Run the display ap { all | ap-group ap-group } command to check AP information.
  • Run the display ap update configuration command to check the AP upgrade configuration.
  • Run the display ap update status { all | downloading | failed | succeed | ap-name ap-name | ap-id ap-id } command to check the AP upgrade progress.
  • Run the display ap update schedule-task command to view information about scheduled AP upgrade tasks.
  • Run the display ap-type { all | id type-id | type ap-type } command to check information about AP types.
  • Run the display ap version { all | { ap-group ap-group-name | version-name version-name } * } command to check information about AP versions.
  • Run the display ap coordinate { all | ap-group ap-group-name } command to check longitudes and latitudes of APs.
  • Run the display ap-system-profile { all | name profile-name } command to check configuration and reference information about an AP system profile.
  • Run the display references ap-system-profile name profile-name command to check reference information about an AP system profile.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 159196

Downloads: 439

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next