No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multimedia Air Interface Optimization

Configuring Multimedia Air Interface Optimization

Context

Adjust WMM parameter settings as follows:
  • Manual adjustment: You can manually adjust EDCA parameter settings and ACK policies for APs and STAs.
  • Automatic adjustment: After multimedia air interface optimization is enabled, the system automatically adjusts EDCA parameter settings and ACK policies for APs and STAs.

After multimedia air interface optimization is enabled, the system dynamically adjusts EDCA parameter settings and ACK policies based on the number of different types of access users, improving user experience on voice and video applications.

The number of voice or video users is identified based on the user packet density threshold configured using the multimedia-air-optimize threshold command. If the number of voice or video packets sent by a user through the internal statistics queue of a radio with the unit time (1 second) exceeds the threshold, the user is considered a voice or video user.

After the multimedia-air-optimize enable command is executed, the wmm edca-ap and wmm edca-client (SSID profile view) commands do not take effect.

For details about the configuration for manual EDCA parameter adjustment, see Configuring WMM.

Pre-configuration Tasks

Before configuring multimedia air interface optimization, complete the following tasks:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run rrm-profile name profile-name

    A radio resource management (RRM) profile is created, and the RRM profile view is displayed.

  4. Run multimedia-air-optimize enable

    Multimedia air interface optimization is enabled.

    By default, multimedia air interface optimization is disabled.

  5. (Optional) Run multimedia-air-optimize threshold { video video | voice voice } *

    The user packet density threshold is set for multimedia air interface optimization.

    By default, the video user packet density threshold is 100 per second, and the default voice user packet density threshold is 30 per second.

  6. Run quit

    Return to the WLAN view.

  7. Bind the RRM profile to a radio profile.
    1. Run radio-2g-profile name profile-name or radio-5g-profile name profile-name

      The 2G or 5G radio profile view is displayed.

    2. Run rrm-profile profile-name

      The RRM profile is bound to the 2G or 5G radio profile view.

    3. Run quit

      Return to the WLAN view.

  8. Bind the radio profile to an AP group or a specific AP. For the detailed procedure, see Binding a Radio Profile.

Verifying the Configuration

  • Run the display rrm-profile name profile-name command to check configuration of the multimedia air interface optimization function.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 150370

Downloads: 427

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next