No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Priorities for Lync Packets

Configuring Priorities for Lync Packets

Context

Microsoft Lync is a set of communication software that provides voice, video, desktop sharing, and file transfer functions. To ensure QoS guarantee for Lync packets and improve user experience, configure the switch to communicate with the Lync server and set the priority of Lync packets.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lync listener { http-port port-num | https-port port-num ssl-policy ssl-policy }

    The switch is configured to communicate with the Lync server and the port number is specified.

    By default, the switch is not configured to communicate with the Lync server and the port number is not specified.

    NOTE:

    To prevent the impact on the exchange with the Lync server, you are advised to use the port number that is not in use. You can run the display ip socket register-port command to check used port numbers.

  3. (Optional) Run lync acl acl-number

    The switch is configured to use an ACL to filter packets sent by the Lync server. This function protects the switch against many packets sent by bogus Lync servers.

    NOTE:

    To ensure that the packet filtering function takes effect in time, create a basic or advanced ACL and configure rules before you run this command.

  4. Run ucc-profile name profile-name

    A UCC profile is created and the UCC profile view is displayed.

    By default, no UCC profile is created.

  5. Run the following commands as required.

    • Run app-share remark { 8021p 8021p-value | dscp { dscp-value | dscp-name } | local-precedence { local-precedence-value | local-precedence-name } }

      The priority of Lync desktop sharing packets is set.

    • Run file-transfer remark { 8021p 8021p-value | dscp { dscp-value | dscp-name } | local-precedence { local-precedence-value | local-precedence-name } }

      The priority of Lync file transfer packets is set.

      By default, the priority of Lync file transfer packets is not set.

    • Run video remark { 8021p 8021p-value | dscp { dscp-value | dscp-name } | local-precedence { local-precedence-value | local-precedence-name } }

      The priority of Lync video packets is set.

      By default, the priority of Lync video packets is not set.

    • Run voice remark { 8021p 8021p-value | dscp { dscp-value | dscp-name } | local-precedence { local-precedence-value | local-precedence-name } }

      The priority of Lync voice packets is set.

      By default, the priority of Lync voice packets is not set.

  6. Run quit

    Exit from the UCC profile view.

  7. Run wlan

    The WLAN view is displayed.

  8. Run vap-profile name profile-name

    A VAP profile is created and the VAP profile view is displayed.

    By default, no VAP profile is created.

  9. Run ucc-profile profile-name

    The UCC profile is bound to the VAP profile.

    By default, no UCC profile is bound to a VAP profile.

Verifying the Configuration

Run the display ucc-profile { all | name profile-name } command to check the UCC profile configuration and application.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 109896

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next