No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying Profiles

Applying Profiles

Context

After the configuration is complete, apply profiles to an AP group or AP so that the configuration can be automatically delivered to specific APs and takes effect.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run wired-port-profile name profile-name

    The AP wired port profile view is displayed.

  4. Run port-link-profile profile-name

    The AP wired port link profile is bound to the AP wired port profile.

    By default, the AP wired port link profile default is bound to an AP wired port profile.

  5. Run quit

    Return to the WLAN view.

  6. Apply the AP wired port profile and AP system profile.

    • Binding the AP wired port profile and AP system profile to an AP group
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

      3. Run the wired-port-profile profile-name interface-type interface-number command to bind the AP wired port profile to the AP group.

        By default, the AP wired port profile default is bound to an AP group.

    • Binding the AP wired port profile and AP system profile to an AP
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.

      3. Run the wired-port-profile profile-name interface-type interface-number command to bind the AP wired port profile to the AP.

        By default, no AP wired port profile is bound to an AP.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 148668

Downloads: 425

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next