No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R012C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set the CIR and CBS During Rate Limiting Configuration?

How Do I Set the CIR and CBS During Rate Limiting Configuration?

During rate limiting configuration, the committed information rate (CIR) and committed burst size (CBS) need to be set. The CIR is the guaranteed average transmission rate, and the CBS is the volume of burst traffic that can pass through an interface. To set the rate limit to 4 Mbit/s, set the CIR to 4096 kbit/s (4 x 1024 kbit/s). You are advised to set the CBS to be 100 to 200 times the CIR. If the CBS is not configured, the default value is used. When a single token bucket is used, the default CBS is 188 times the CIR. When dual token buckets are used, the default CBS is 125 times the CIR.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038410

Views: 18005

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next