No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R012C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics on ACL-based Packet Filtering

Clearing Statistics on ACL-based Packet Filtering

Context

To re-collect statistics on ACL-based packet filtering, run the following command to clear existing statistics.

The cleared statistics on ACL-based packet filtering cannot be restored. Exercise caution when you run the command.

Procedure

  • Run the following commands to clear statistics about ACL-based packet filtering on the device.

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { bas-acl | adv-acl } [ rule rule-id ] ] [ secure ]

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound acl user-acl [ rule rule-id ]

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] outbound [ acl { bas-acl | adv-acl | user-acl } [ rule rule-id ] ]

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { acl-name | l2-acl } [ rule rule-id ] [ acl { bas-acl | adv-acl | acl-name } [ rule rule-id ] ] ] [ secure ]

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] outbound [ acl { acl-name | l2-acl } [ rule rule-id ] [ acl { bas-acl | adv-acl | acl-name } [ rule rule-id ] ] ]

    • reset traffic-statistics { interface | vlan } inbound [ secure ]

    • reset traffic-statistics { interface | vlan } outbound

    • reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] { inbound | outbound } [ acl ipv6 { bas-acl | adv-acl | acl-name } [ rule rule-id ] ]

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038410

Views: 17997

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next