No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R012C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Interface-based Rate Limiting

Configuring Interface-based Rate Limiting

Pre-configuration Tasks

Interface-based rate limiting controls the total rate of all packets passing through an interface to ensure that the bandwidth usage is within the allowed range. You can configure interface-based rate limiting in both inbound and outbound directions or in one direction.

Before configuring interface-based rate limiting on an interface, configure link layer attributes of the interface to ensure that the interface works properly.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038410

Views: 18072

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next