No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Bar 500, Box 500, Box 700, Box 900, Board V600R019C00 Command Reference

This document describes the commands applicable to the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the debugging commands of HUAWEI Bar 500, Box 500, Box 700, Box 900, and Board V600R019C00. Videoconferencing endpoints of different models have different hardware interfaces and software functions. Therefore, the debugging commands and debugging command usage methods vary depending on the videoconferencing endpoint model.

Intended Audience

This document is primarily intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History






This is the fifth official release.

  • Added 3.2.109 mnt setFullFormatAuxCap
  • Added 3.2.110 mnt SetSinLowThrd
  • Added 3.2.111 mnt MaecUpdateThrd
  • Added 3.2.112 mnt MaecRes2UpFact
  • Added 3.2.113 mnt MaecRes1UpFact
  • Added 3.2.114 mnt MaecResMakeRate
  • Added 3.2.115 mnt MaecResFactor
  • Added 3.2.116 mnt MaecBlock
  • Added 3.2.117 mnt MaecNlp
  • Added 3.2.118 mnt MaecAnsDyn



This is the fourth official release.

  • Deleted 3.1.7 mc bpslicemode
  • Deleted 3.1.8 mc bpslicetable
  • Modified 3.1.13 mc cfg
  • Added 3.1.85 mc VideoDecOutputMode
  • Added 3.1.86 mc t140
  • Added 3.1.87 mc H263PlusAuxCiscoMode
  • Added 3.1.88 mc RtpEarlySnpMode
  • Added 3.2.29 mnt eShare
  • Added 3.2.105 mnt SNtoESN
  • Added 3.2.106 mnt CmdCustom
  • Added 3.2.107 mnt AudioStep
  • Modified 9.1.14 hmev show
  • Modified 9.1.20 hmev test
  • Added 9.1.41 hmev H263EncInfo
  • Added 9.1.42 hmev H263DecInfo
  • Added 9.1.43 hmev scctrace



This is the third official release.

  • Added 2.1.199 audio SetDigitAuxFollow
  • Added 2.1.200 audio SetDigitFollowEnable
  • Added 2.1.201 audio SetHdmiOutputSwitch
  • Added 2.1.202 audio SetAMDereverbEnable
  • Added 2.1.203 audio SetAIEQEnable
  • Added 2.1.204 audio SetResOddEven
  • Added 2.1.205 audio SwitchFarrow
  • Added 3.1.86 mc svc.
  • Added 3.1.85 mc EnableH265LowBdw
  • Added 3.2.5 mnt aifaceswitch
  • Added 3.2.6 mnt aifacetrace
  • Added 3.2.90 mnt VPT300Info
  • Added 4.1.5 cc showsvc
  • Modified 7.1.8 bsp lcd
  • Modified 7.4.2 bsp camequip
  • Modified 7.4.3 bsp mb
  • Modified 7.7.3 bsp i2cupd
  • Added 8.1.5 osv eptz 6
  • Deleted 8.1.10 osv capture
  • Modified 9.1.20 hmev test
  • Modified 9.2.4 vio setVoport
  • Added 13.4 cp logcat



This issue is the second official release.

  • Deleted 7.3.5 "bsp sip."
  • Added 2.1.196 "audio TraceEventTime."
  • Added 2.1.197 "audio ShowBadSlotData."
  • Added 2.1.198 "audio SetHDMIInsertSamples."
  • Modified 3.2.32 "mnt interface."



This issue is the first official release.

Updated: 2019-06-25

Document ID: EDOC1100038500

Views: 106051

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next