No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Box 500, Box 700, and Box 900 V600R019C00 Web Online Help

Web Online Help
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the HTTP Proxy Parameters

Setting the HTTP Proxy Parameters

If the HTTP proxy is required, configure it by following the instructions in this section.


  1. Choose System Settings > Network and click the HTTP Proxy tab.
  2. Set the HTTP proxy parameters, as described in Table 1-28.

    Table 1-28  HTTP proxy parameters




    Proxy server address

    Specifies the IP address of the HTTP proxy.

    No default value is set for this parameter.

    User name


    Specifies the user name and password for authenticating the HTTP proxy.

    No default value is set for this parameter.


    Specifies the port used by the endpoint to interact with the HTTP proxy.

    The default value is 8080.

  3. Click Save to make the settings take effect.
Updated: 2019-06-25

Document ID: EDOC1100038526

Views: 20072

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next