No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Box 500, Box 700, and Box 900 V600R019C00 Web Online Help

Web Online Help
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Wizard

Using the Wizard

The configuration wizard helps you quickly set the endpoint's basic information, network parameters, and video input parameters.

Background

Generally, the administrator sets the network and camera parameters when installing the system. Users do not need to set these parameters when using your endpoint for videoconferencing. To modify the parameter settings, the administrator can use the wizard to quickly complete the modification.

Procedure

  1. Choose System Settings > Wizard.

    The Wizard page is displayed.

  2. Set the basic information and network parameters listed in Table 1-1.

    Table 1-1  Basic information and network parameters

    Parameter

    Description

    Setting

    General

    Site name

    Specifies the local site.

    The default value is site.

    System time

    Specifies the time set on the system.

    Set the system time to your local time to ensure appropriate use of system functions, such as joining conferences on time and recording accurate event occurrence time in logs.

    Set this parameter to the actual time.

    LAN1(WAN)

    Network interface mode

    Specifies the working mode for the network ports on the endpoint.

    • Auto-detect: When accessing the network, the endpoint automatically negotiates with a remote network device to determine the optimal work mode.
    • 10 Mbps and half duplex: The data transmission rate is 10 Mbit/s, and data cannot be sent and received at the same time.
    • 10 Mbps and full duplex: The data transmission rate is 10 Mbit/s, and data can be sent and received at the same time.
    • 100 Mbps and half duplex: The data transmission rate is 100 Mbit/s, and data cannot be sent and received at the same time.
    • 100 Mbps and full duplex: The data transmission rate is 100 Mbit/s, and data can be sent and received at the same time.
    • 1000 Mbps and full duplex: The data transmission rate is 1000 Mbit/s, and data can be sent and received at the same time.

    The default value is Auto-detect.

    The network interface mode set here must be the same as that set for the access network device (generally, switch). By default, the network interface mode is set to Auto-detect for the switch.

    NOTE:

    When you do not know the network port working mode of a remote network device, set this parameter to Auto-detect. Otherwise, the endpoint may fail to access the network.

    Connection type

    Specifies the mode in which the endpoint obtains an IP address.

    • Static IP: The network administrator assigns an IP address to the endpoint. If you select this option, you must also set Local IP address, Subnet mask, and Gateway address.
    • Dynamic IP: When a DHCP server is available on the network, the endpoint automatically obtains an IP address using the Dynamic Host Configuration Protocol (DHCP).

    The default value is Dynamic IP.

    Local IP address

    Specifies the local IP address of the endpoint, using which you can log in to the endpoint's web interface. In addition, the endpoint can be called by other devices through this IP address.

    The default IPv4 address is 192.168.1.1. There is not default IPv6 address.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the IP address obtained from the network administrator.

    Examples:
    • IPv4: 192.168.1.10
    • IPv6: fc00::0:0:0:192:168:1:10

    Subnet mask

    Specifies the subnet mask for the endpoint IP address. A subnet mask divides the IP address into a network address and a host address.

    The default value is 255.255.255.0.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the subnet mask obtained from the network administrator.

    Gateway address

    Specifies the gateway address that corresponds to the endpoint IP address.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the subnet mask obtained from the network administrator.

    Examples:

    • IPv4: 192.168.0.1
    • IPv6: fc00::0:0:0:192:168:1:10

    IPv6

    Specifies whether IPv6 is used. If you use IPv6, you must also set Local IP address, Subnet prefix length, and Gateway address.

    The default value is Disable.

    Subnet prefix length

    Set this parameter only when you enable IPv6.

    This parameter specifies the length of the network address part in the IPv6 address.

    The IPv6 subnet prefix is in the same format as the IPv4 subnet prefix, that is, address/subnet prefix length. For example, in subnet prefix 21DA:D3:0:2F3B::/64, 64 indicates the subnet prefix length of the address.

    The default value is 0.

    The value ranges from 0 to 128.

    LAN2(LAN)

    Network interface mode

    Specifies the working mode for the network ports on the endpoint.

    • Auto-detect: When accessing the network, the endpoint automatically negotiates with a remote network device to determine the optimal work mode.
    • 10 Mbps and half duplex: The data transmission rate is 10 Mbit/s, and data cannot be sent and received at the same time.
    • 10 Mbps and full duplex: The data transmission rate is 10 Mbit/s, and data can be sent and received at the same time.
    • 100 Mbps and half duplex: The data transmission rate is 100 Mbit/s, and data cannot be sent and received at the same time.
    • 100 Mbps and full duplex: The data transmission rate is 100 Mbit/s, and data can be sent and received at the same time.
    • 1000 Mbps and full duplex: The data transmission rate is 1000 Mbit/s, and data can be sent and received at the same time.

    The default value is Auto-detect.

    The network interface mode set here must be the same as that set for the access network device (generally, switch). By default, the network interface mode is set to Auto-detect for the switch.

    NOTE:

    When you do not know the network port working mode of a remote network device, set this parameter to Auto-detect. Otherwise, the endpoint may fail to access the network.

    Connection type

    Specifies the mode in which the endpoint obtains an IP address.

    • Static IP: The network administrator assigns an IP address to the endpoint. If you select this option, you must also set Local IP address, Subnet mask, and Gateway address.
    • Dynamic IP: When a DHCP server is available on the network, the endpoint automatically obtains an IP address using the Dynamic Host Configuration Protocol (DHCP).

    The default value is Dynamic IP.

    Local IP address

    Specifies the local IP address of the endpoint, using which you can log in to the endpoint's web interface. In addition, the endpoint can be called by other devices through this IP address.

    The default IPv4 address is 192.168.1.1. There is not default IPv6 address.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the IP address obtained from the network administrator.

    Examples:
    • IPv4: 192.168.1.11
    • IPv6: fc00::0:0:0:192:168:1:11

    Subnet mask

    Specifies the subnet mask for the endpoint IP address. A subnet mask divides the IP address into a network address and a host address.

    The default value is 255.255.255.0.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the subnet mask obtained from the network administrator.

    Gateway address

    Specifies the gateway address that corresponds to the endpoint IP address.

    You do not need to set this parameter if Connection type is set to Dynamic IP. If Connection type is set to Static IP, enter the subnet mask obtained from the network administrator.

    Examples:

    • IPv4: 192.168.0.1
    • IPv6: fc00::0:0:0:192:168:0:1

    IPv6

    Specifies whether IPv6 is used. If you use IPv6, you must also set Local IP address, Subnet prefix length, and Gateway address.

    The default value is Disable.

    Subnet prefix length

    Set this parameter only when you enable IPv6.

    This parameter specifies the length of the network address part in the IPv6 address.

    The IPv6 subnet prefix is in the same format as the IPv4 subnet prefix, that is, address/subnet prefix length. For example, in subnet prefix 21DA:D3:0:2F3B::/64, 64 indicates the subnet prefix length of the address.

    The default value is 0.

    The value ranges from 0 to 128.

  3. Click Next.

    The Registration page is displayed.

  4. Obtain the server to connect to and its settings from the administrator. Table 1-2 describes the server types.

    Table 1-2  Server parameters

    Server Type (Cloud Platform)

    Description

    Huawei Cloud

    Click Activate. After the Huawei cloud service is activated, the endpoint automatically obtains configuration data from the Huawei cloud platform.

    TMS

    Enter the server address, authentication user name, and authentication password of the Huawei Terminal Management System (TMS) and click Activate. After the TMS is activated, the endpoint automatically obtains configuration data from the TMS.

    SMC

    Enter the server address, authentication user name, and authentication password of the SMC and click Activate. After the SMC is activated, the endpoint automatically obtains configuration data from the SMC.

    eSight

    Enter the server address, authentication user name, and authentication password of the eSight and click Activate. After the eSight is activated, the endpoint automatically obtains configuration data from the eSight.

    Manual

    Manually set H.323 and SIP parameters. Refer to Setting Cloud Service Parameters.

  5. Click Next.

    The Video Input page is displayed.

  6. Set the video input parameters. Refer to Configuring Video Input.
  7. Click Finish.
Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100038526

Views: 18794

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next