No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Box 500, Box 700, and Box 900 V600R019C00 Web Online Help

Web Online Help
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting AI Voice Parameters

Setting AI Voice Parameters

Before using the AI voice assistant function, you need to set AI voice parameters.

  1. Choose System Settings > AI Parameters and click the Voice tab.
  2. Set AI voice parameters, as described in Table 1-37.

    Table 1-37  Parameter description

    Parameter

    Description

    Setting

    AI voice assistant

    Specifies whether to enable the AI voice assistant function. After the function is enabled, you can control a conference, adjust the volume, and send presentations with your voice.

    The default value is Disable.

    AI audio source

    Sets the microphone used by the AI voice assistant to receive voice.

    This parameter is available when AI voice assistant is set to Enable.

    The default value is Microphone XLR connector.

  3. Click Save.
Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100038526

Views: 18894

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next