No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Box 500, Box 700, and Box 900 V600R019C00 Web Online Help

Web Online Help
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Whitelists

Setting Whitelists

After you set a whitelist, only devices with the IP addresses specified in the whitelist can connect to the endpoint. If the whitelist is empty, all IP addresses are allowed to connect to the endpoint. The whitelist helps enhance videoconferencing security.

Background

Set the whitelist under the guidance of technical support engineers.
The endpoint whitelist is empty by default. That is, all IP addresses are allowed to connect to the endpoint. If an endpoint is deployed in a public network, it is recommended that you add commonly used IP addresses and IP address segments to the whitelist to decrease network attack risks. You must add the IP addresses of the following devices to the whitelist:
  • PC that is used to access the endpoint web interface
  • Videoconferencing MCU
  • SMC2.0

Procedure

  1. Choose System Settings > Whitelist.
  2. Select Enable.

    If Enable is deselected, the whitelist is invalid. That is, all IP addresses are allowed to connect to the endpoint. You can modify the whitelist only after selecting Enable here.

  3. Click Add and set IP address and Mask length.
  4. Click OK. The settings take effect immediately.

    To delete a record from the whitelist, select the record and click Delete.

Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100038526

Views: 20386

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next