No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Box 500, Box 700, and Box 900 V600R019C00 Web Online Help

Web Online Help
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Address Book Parameters

Setting Address Book Parameters

To allow the endpoint to download site information from the network address book, you need to set the network address book parameters.

Background

The network address book stores information about the sites in a videoconferencing system. The site to be called is queried on the Lightweight Directory Access Protocol (LDAP) server and corporate directory.

NOTE:
The LDAP server and corporate directory can store site information. The endpoint accesses the LDAP server or corporate directory through LDAP and find the site to be called.

Procedure

  1. Choose System Settings > Registration and click the Address Book tab.
  2. Set the address book parameters listed in Table 1-31.

    Table 1-31  Address book parameters

    Parameter

    Description

    Setting

    LDAP Address Book

    Server address

    Specifies the IP address of the LDAP server or corporate directory server.

    No default value is set for this parameter.

    Port

    Specifies the port for connecting to the LDAP server or corporate directory server.

    The default value is 389.

    The value can be 389 or an integer ranging from 1025 to 65534 (excluding 4999, 5000, 5001, and 13333).

    Base DN

    Specifies the distinguished name (DN) of the entry at which a specified search starts.

    No default value is set for this parameter.

    Example: dc=zdtest,dc=com

    Authentication type

    Specifies the LDAP server or corporate directory server authentication mode.

    • General: Use the user name and password for authentication.
    • Secured: Perform authentication, including authentication on digital certificates, based on the Secure Sockets Layer (SSL) protocol.

    The default value is General.

    SSL encryption

    Specifies whether the SSL protocol is used to encrypt data streams sent to and received from the LDAP server or corporate directory server.

    The default value is Enable.

    User name

    Password

    Specifies the user name and password used for LDAP server or corporate directory server authentication.

    The default value of User name is admin.

    The value can consist of digits, letters, and special characters, such as @ # %.

    Auto synchronize

    Specifies whether your endpoint regularly updates the LDAP Address Book entries in the local address book.

    NOTE:

    If you set this parameter to Enable, you must also set Automatic update interval and Local records prevail in case of duplicates.

    The default value is Enable.

    Automatic update interval

    Specifies the interval for updating the LDAP Address Book entries in the local address book.

    The default value is 24 h.

    Local records prevail in case of duplicates

    Specifies whether records that already exist in the local address book remain unchanged during an address update from the address book on the LDAP server or corporate directory server.

    The default value is Disable.

    Search LDAP

    If this function is enabled, the system will automatically search for sites based on the specified Search keyword after entering the Address Book page.
    NOTE:

    You need to set Search keyword if the Search LDAP function is enabled.

    The default value is Enable.

    Search keyword

    Specifies the keyword that the system uses to search for sites after entering the Address Book page.

    No default value is set for this parameter.

  3. Click Save.
Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100038526

Views: 20230

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next