No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
References for Ethernet Switching

References for Ethernet Switching

The following table lists the references for Ethernet switching.

Document

Description

IEEE 802.3

Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications

IEEE 802.3ae

Media Access Control (MAC) Parameters, Physical Layers, and Management parameters for 10Gb/s Operation

RFC 894

A Standard for the Transmission of IP Datagrams over Ethernet Networks

RFC 1042

A Standard for the Transmission of IP Datagrams over IEEE 802 Networks

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 95655

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next