No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of SEP

Overview of SEP

Definition

The Smart Ethernet Protection (SEP) protocol is a ring network protocol specially used for the Ethernet link layer. A SEP segment consists of interconnected Layer 2 switching devices configured with the same SEP segment ID and control VLAN ID. A SEP segment is the basic unit of SEP.

Purpose

SEP blocks redundant links to prevent logical loops on a ring network. Redundant links are used on an Ethernet switching network to provide link backup and enhance network reliability. However, the use of redundant links may produce loops, causing broadcast storms and rendering the MAC address table unstable. As a result, communication quality deteriorates, and services may even be interrupted. Huawei switches support the following ring network protocols:
  • STP/RSTP/MSTP

    STP, RSTP, and MSTP are standard protocols for breaking loops on Ethernet networks. Networks running these protocols converge slowly, failing to meet the transmission requirements of some real-time services. The convergence time is affected by the network topology. Huawei devices running STP, RSTP, or MSTP can communicate with non-Huawei devices.

  • RRPP

    RRPP is a fast convergence Huawei proprietary protocol. RRPP requires a physical topology to be divided into logical topologies so that major rings and sub-rings can be differentiated. Therefore, RRPP does not apply to complex networks. A Huawei device running RRPP cannot communicate with any non-Huawei device.

Huawei developed SEP to overcome the disadvantages of the preceding ring network protocols. SEP has the following advantages:
  • Works on diverse complex networks and supports all topologies and network topology queries. A network running SEP can connect to a network running STP, RSTP, MSTP, or RRPP.

    Helps quickly locate blocked interfaces through network topology display. When a fault occurs, SEP can quickly locate the fault, improving network maintainability.

  • Implements traffic load balancing by selectively blocking interfaces.
  • Improves network stability by preventing traffic from switching back after link recovery.
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 118634

Downloads: 73

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next