No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for SEP

Licensing Requirements and Limitations for SEP

Involved Network Elements

Other network elements also need to support SEP.

Licensing Requirements

SEP is a basic feature of a switch and is not under license control.

Version Requirements

Table 17-9  Products and versions supporting SEP

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE

V200R013C00

S7706 PoE

V200R013C00

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • Table 17-10 lists the specification of SEP.

    Table 17-10  Specification of SEP
    Item Specification

    Maximum number of segments on the device

    256

  • On a SEP network where there are no-neighbor edge interfaces, a device that is not in a SEP segment cannot be added to the control VLAN of the SEP segment. Otherwise, a loop will occur on the network.

  • SEP and VLAN stacking cannot be configured on an interface of an SA series card simultaneously.
  • If both SEP and VLL are deployed on the network and the SEP segment ID configured on the PE is different from that configured on the CE, SEP protocol packets sent by the CE cannot traverse VLL tunnels. Therefore, SEP cannot be used to connect o VLL networks through the closed ring topology.
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 109697

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next