No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of RRPP Configuration Tasks

Summary of RRPP Configuration Tasks

You can deploy RRPP only after basic functions of RRPP are configured. If RRPP is deployed with VPLS, you need to configure RRPP snooping. Table 18-3 describes the RRPP configuration tasks.

Table 18-3  RRPP configuration tasks

Scenario

Description

Task

Configure RRPP

RRPP prevents loops when the ring is complete. RRPP can rapidly restore communication on the ring network when the ring network is faulty. There are three networking modes: single ring, intersectant ring, and tangent ring.

Configuring RRPP

Configure RRPP snooping

RRPP snooping notifies a VPLS network of changes in an RRPP ring. After RRPP snooping is enabled on sub-interfaces or VLANIF interfaces, the VPLS network can transparently transmit RRPP packets, detect changes on the RRPP ring, and update forwarding entries, ensuring that traffic can be rapidly switched to a non-blocking path.

Configuring RRPP Snooping

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 108983

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next