No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN Aggregation

Licensing Requirements and Limitations for VLAN Aggregation

Involved Network Elements

Other network elements are not required.

Licensing Requirements

VLAN aggregation, also called super-VLAN, is a basic feature of a switch and is not under license control.

Version Requirements

Table 5-1  Products and versions supporting VLAN aggregation

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE

V200R013C00

S7706 PoE

V200R013C00

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • The super-VLAN cannot be used with Layer 3 multicast.
  • VLAN 1 cannot be configured as a super-VLAN.
  • A physical interface cannot be added to a VLAN configured as a super-VLAN.
  • A traffic policy takes effect in a super-VLAN only after the traffic policy is configured in all sub-VLANs of the super-VLAN.
  • If the dot1q termination vid or qinq termination pe-vid ce-vid command is used to configure a VLAN for the VLAN termination sub-interface, the VLAN cannot be configured as a super-VLAN or sub-VLAN.
  • Proxy ARP takes effect only if an IP address is assigned to the VLANIF interface corresponding to the super-VLAN.
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 108906

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next