No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for ERPS

Licensing Requirements and Limitations for ERPS

Involved Network Elements

Other network elements are required to support ERPS functions.

Licensing Requirements

ERPS is a basic feature of a switch and is not under license control.

Version Requirements

Table 19-6  Products and versions supporting ERPS

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE

V200R013C00

S7706 PoE

V200R013C00

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • V200R002 and earlier versions support only ERPSv1.
  • Before adding a port to an ERPS ring, ensure that port security has been disabled on the port. Otherwise, loops cannot be eliminated.
  • Before adding a port to an ERPS ring, ensure that the Spanning Tree Protocol (STP), Rapid Ring Protection Protocol (RRPP), Smart Ethernet Protection (SEP), or Smart Link is not enabled on the port.
  • The service loopback function and ERPS cannot be configured on an Eth-Trunk simultaneously.

  • ERPS and VLAN stacking cannot be configured on an interface of an SA series card simultaneously.
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 107848

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next