No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Protocol Packet Transparent Transmission in a VLAN

Protocol Packet Transparent Transmission in a VLAN

When the device used as the gateway or as a Layer 2 switch enabled with snooping functions such as DHCP/IGMP/MLD snooping, then the device needs to parse and process the corresponding protocol packets. Protocol packets received by an interface are sent to the CPU for processing and the interface sends protocol packets without differentiating VLANs. If the preceding snooping functions are deployed, protocol packets from all VLANs are sent to the CPU for processing.

If the device is a gateway for some VLANs or snooping functions are deployed in some VLANs, the device does not need to process protocol packets from other VLANs. After the protocol packets in other VLANs are sent to the CPU, the CPU needs to forward them to other devices. This mechanism is called software forwarding. Protocol packet processing in software forwarding decreases the forwarding efficiency.

To address this issue, deploy protocol packet transparent transmission in VLANs where protocol packets do not need to be processed. This function enables the device to transparently transmit the protocol packets from VLANs to other devices, improving forwarding speed and efficiency.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 102865

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next