No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enterprise Network Connection Through Private Lines

Enterprise Network Connection Through Private Lines

As shown in Figure 10-8, two sites of an enterprise are located in different areas. Each site has three networks: Finance, Marketing, and Others. To ensure network security, the enterprise requires that users belonging to each network be unable to communicate with each other only within the network but not be able to communicate with users on other networks.

Figure 10-8  Private line connection between enterprise users

The carrier uses VPLS technology on the MPLS/IP core network and basic QinQ technology on the metro Ethernet network. Each site is assigned VLANs 100, 200, and 300, which represent the Finance, Marketing, and Others departments respectively. The UPEs at two ends tag received packets with outer VLAN 1000 (different outer VLAN tags are allowed at two ends), and the same VSI is configured on the NPEs. This configuration ensures that only users who belong to the same VLAN in different sites can communicate with each other.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 102790

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next