No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for STP/RSTP

Licensing Requirements and Limitations for STP/RSTP

Involved Network Elements

Other network elements also need to support STP or RSTP.

Licensing Requirements

STP or RSTP is a basic feature of a switch and is not under license control.

Version Requirements

Table 14-13  Products and versions supporting STP or RSTP

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE

V200R013C00

S7706 PoE

V200R013C00

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

When STP or RSTP is enabled on a ring network, STP or RSTP immediately starts spanning tree calculation. Parameters such as the device priority and port priority affect spanning tree calculation, and changing these parameters may cause network flapping. To ensure fast and stable spanning tree calculation, configure parameters such as the device priority and port priority before enabling STP or RSTP.

On a switch enabled with a spanning tree protocol, when a terminal connects to the switch, spanning tree calculation is performed again. As a result, it takes a long period of time for the terminal to obtain an IP address. In this case, disable the spanning tree protocol on the switch port connected to the terminal or configure this switch port as the edge port.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 108489

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next