No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring STP/RSTP Topology Change Statistics

Monitoring STP/RSTP Topology Change Statistics

Context

The statistics about STP/RSTP topology changes can be viewed. If the statistics increase, network flapping occurs.

Procedure

  • Run the display stp topology-change command to check statistics about STP/RSTP topology changes.
  • Run the display stp [ interface interface-type interface-number | slot slot-id ] tc-bpdu statistics command to check statistics about sent and received TC/TCN packets.
  • Run the display stp [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check the spanning tree status and statistics.
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 95591

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next