No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of Layer 2 Protocol Transparent Transmission Configuration Tasks

Summary of Layer 2 Protocol Transparent Transmission Configuration Tasks

Table 22-1 lists the configuration task summary of Layer 2 protocol transparent transmission.

Table 22-1  Layer 2 protocol transparent transmission configuration tasks
Item Description Task

Configuring interface-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to only one user network and Layer 2 protocol packets sent from the user network do not need VLAN tags, configure interface-based Layer 2 protocol transparent transmission on the interface connected to the user network. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network.

Configuring Interface-based Layer 2 Protocol Transparent Transmission

Configuring VLAN-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to multiple user networks and Layer 2 protocol packets sent from user networks contain VLAN tags, configure VLAN-based Layer 2 protocol transparent transmission. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network.

Configuring VLAN-based Layer 2 Protocol Transparent Transmission

Configuring basic QinQ-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to multiple user networks and Layer 2 protocol packets sent from user networks contain VLAN tags, configure basic QinQ-based Layer 2 protocol transparent transmission. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network and reduces VLAN IDs that the carrier uses.

Configuring QinQ-based Layer 2 Protocol Transparent Transmission

Configuring VPLS-based Layer 2 protocol transparent transmission

When the backbone network is the L2VPN that is built based on VPLS, you can configure VPLS-based Layer 2 protocol transparent transmission so that Layer 2 protocol packets can be transmitted on the backbone network.

Configuring VPLS-based Layer 2 Protocol Transparent Transmission

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 118687

Downloads: 73

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next