No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R012C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for MSTP

Licensing Requirements and Limitations for MSTP

Involved Network Elements

Other network elements also need to support MSTP.

Licensing Requirements

MSTP is a basic feature of a switch and is not under license control.

Version Requirements

Table 15-7  Products and versions supporting MSTP


Product Model

Software Version


S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE


S7706 PoE



S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • Table 15-8 lists the specification of MSTP.
    Table 15-8  Specification of MSTP
    Item Specification

    Maximum number of instances on the entire system


  • MSTP BPDUs may be discarded in a scenario wherein there are many MSTIs and MSTP multi-process is configured. This is due to the default CIR of STP being insufficient. (The default CIR of STP is insufficient because the length of MSTP BPDUs increases as the number of MSTIs increases, and the number of outgoing MSTP BPDUs increases when MSTP multi-process is configured.) To avoid this situation, increase the CIR of STP.

    If the CPCAR values are adjusted improperly, network services are affected. To adjust the CPCAR values of STP BPDUs, contact technical support personnel.

  • Enabling MSTP on a ring network immediately triggers spanning tree calculation. If basic configurations are not performed on switches and interfaces before MSTP is enabled, network flapping may occur upon changes to parameters such as device priority and interface priority.

Updated: 2019-01-18

Document ID: EDOC1100038843

Views: 108374

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next