No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.16 ospfIfStateChange

OSPF_1.3.6.1.2.1.14.16.2.16 ospfIfStateChange

Description

The status of the non-virtual interface changes. (RouterId=[RouterId], IfIpAddress=[IfIpAddress], AddressLessIf=[AddressLessIf], IfState=[IfState], ProcessId=[ProcessId], AreaId=[AreaId], IfnetIndex=[IfnetIndex], LocalIfIpAddress=[LocalIfIpAddress], IfName=[IfName], InstanceName=[InstanceName], IfChgReason=[IfChgReason])

The status of the non-virtual OSPF interface changed. The possible cause is that the physical interface went Down.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Informational

Mnemonic Code

ospfIfStateChange

Trap OID

1.3.6.1.2.1.14.16.2.16

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

RouterId

Indicates the router ID.

IfIpAddress

Indicates the interface IP address.

AddressLessIf

Indicates the interface index.

IfState

Indicates the interface status.

ProcessId

Indicates the process ID.

AreaId

Indicates the area ID.

IfnetIndex

Indicates the physical interface index.

LocalIfIpAddress

Indicates the local interface IP address.

IfName

Indicates the physical interface name.

InstanceName

Indicates the instance name.

IfChgReason

Indicates the reason of the change of the interface status.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.14.1.1

ospfRouterId

N/A

1.3.6.1.2.1.14.7.1.1

ospfIfIpAddress

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.7.1.2

ospfAddressLessIf

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.7.1.12

ospfIfState

ospfIfIpAddress;

ospfAddressLessIf;

Impact on the System

This trap may affect the neighbor status. If the interface goes Down, the neighbor relationship will be interrupted.

Possible Causes

Cause 1: The interface status changed.

Cause 2: An OSPF neighbor relationship was being established.

Procedure

  1. Run the display ospf interface command to check whether the interface status is Up.

    • If yes, go to step 3.
    • If no, go to step 2.

  2. Contact technical support personnel technical support engineers.
  3. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 68138

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next