No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEVM_1.3.6.1.4.1.2011.5.25.41.4.7 hwIfMonitorOutputRateRising

DEVM_1.3.6.1.4.1.2011.5.25.41.4.7 hwIfMonitorOutputRateRising

Description

Interface output flow bandwidth usage exceeded the trap threshold. (Interface=[IfIndex], BandWidthUsage=[hwIfMonitorOutputRatePercentage], TrapThreshold=[hwIfMonitorOutputRateThreshold], InterfaceName=[InterfaceName])

The percentage of the rate of outgoing traffic to the total bandwidth on an interface exceeded the threshold.

Attribute

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwIfMonitorOutputRateRising

Trap OID

1.3.6.1.4.1.2011.5.25.41.4.7

Alarm ID

0x081300af

Alarm Type

processingErrorAlarm

Raise or Clear

Raise

Match trap

DEVM_1.3.6.1.4.1.2011.5.25.41.4.8 hwIfMonitorOutputRateResume

Parameters

Name Meaning

Interface

Specifies an interface index.

BandWidthUsage

Indicates statistics on outgoing traffic.

TrapThreshold

Specifies an alarm threshold for outgoing traffic.

InterfaceName

Specifies an interface name.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10

hwIfMonitorOutputRate

hwIfMonitorIndex

1.3.6.1.4.1.2011.5.25.41.1.7.1.1.11

hwIfMonitorOutputRateThreshold

hwIfMonitorIndex

1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19

hwIfMonitorName

hwIfMonitorIndex

Impact on the System

Delay or packet loss occurred when the rate of incoming or outgoing traffic was close to 100% of the total bandwidth.

Possible Causes

The percentage of the rate of outgoing traffic to the total bandwidth on an interface exceeded the threshold.

Procedure

  1. Run the display this interface command in the interface view to check whether the alarm threshold is set too small. The threshold range is specified by users according to service requirements.

    • If so, go to step 2.
    • If not, go to step 3.

  2. Run the trap-threshold output-rate bandwidth-in-use command in the interface view to set the alarm threshold to a larger value. Check whether the trap is cleared.

    • If so, no action is required.
    • If not, go to step 3.

  3. Collect traps, logs, and configurations, and contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 82026

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next