No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.10 hwMplsTunnelHSBResume

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.10 hwMplsTunnelHSBResume

Description

Main LSP of Tunnel resumes from backup LSP in HSB. (TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelAdminStatus=[TunnelAdminStatus], TunnelOperStatus=[TunnelOperStatus])

The trap message was output when the primary CR-LSP went Up and traffic was switched back from the hot-standby CR-LSP to the primary CR-LSP.

Attributes

Attributes

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwMplsTunnelHSBResume

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.10

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

TunnelId

Indicates the ID of the tunnel.

LocalLspId

Indicates the LSP ID of a session.

IngressLsrId

Indicates the LSR ID of the ingress on the tunnel.

EgressLsrId

Indicates the LSR ID of the egress on the tunnel.

TunnelAdminStatus

Indicates the management status of the tunnel.

TunnelOperStatus

Indicates the operation status of the tunnel.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.1.1.1.7

hwMplsTunnelAdminStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.8

hwMplsTunnelOperStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

Impact on the System

Services will not be affected.

Possible Causes

When the tunnel was in the HSB inuse state, the status of the primary LSP changed from Down to Up.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 90696

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next