No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2VPN_1.3.6.1.4.1.2011.5.25.119.1.2.4 hwVplsVsiUp

L2VPN_1.3.6.1.4.1.2011.5.25.119.1.2.4 hwVplsVsiUp

Description

The status of the VPLS VSI turned UP. (VsiName=[STRING], InterfaceIndex=[INTEGER], VsiId=[GAUGE], HWL2VpnStateChangeReason=[INTEGER], VsiStatus=[INTEGER], InterfaceName=[STRING])

The trap was generated when the VPLS VSI was Up.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwVplsVsiUp

Trap OID

1.3.6.1.4.1.2011.5.25.119.1.2.4

Alarm ID

0x0d4f0000

Alarm Type

communicationsAlarm

Raise or Clear

Clear

Match trap

L2VPN_1.3.6.1.4.1.2011.5.25.119.1.2.3_hwVplsVsiDown

Parameters

Parameter Description
VsiName Indicates the name of a VSI.
InterfaceIndex Indicates the interface index.
VsiId Indicates the ID of a VSI.
HWL2VpnStateChangeReason Indicates the cause of the VSI status change.
VsiStatus Indicates the status of the VSI:
  • 1: VSI Up
  • 2: VSI Down
  • 3: VSI Admin down
InterfaceName Indicates the interface name.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.119.1.1.1.1.4

hwVplsVsiID

hwVplsVsiName

1.3.6.1.4.1.2011.5.25.119.1.1.8

hwVplsStateChangeReason

N/A

1.3.6.1.4.1.2011.5.25.119.1.1.1.1.6

hwVplsStatus

hwVplsVsiName

1.3.6.1.2.1.31.1.1.1.1

ifName

ifIndex

Impact on the System

The VPLS service will be recovered.

Possible Causes

Cause 2: VC was created.

Cause 5: LDP session was Up.

Cause 11: New LDP mapping message was received.

Cause 18: Interface was Up.

Cause 23: Tunnel was Up.

Cause 30: LDP notification message was forwarded.

Cause 38: Local AC fault was resumed.

Cause 42: Local PSN fault was resumed.

Cause 59: MTU Matched.

Cause 62: VSI was resumed.

Cause 63: Set Admin VSI.

Procedure

  • If the possible causes are appeared, this trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 81960

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next