No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VSTM_1.3.6.1.4.1.2011.5.25.123.2.13 hwEthernetARPHostIPConflict

VSTM_1.3.6.1.4.1.2011.5.25.123.2.13 hwEthernetARPHostIPConflict

Description

Host IP address conflicted. (LocalIPAddress=[LocalIP], LocalVNIID=[LocalVniId], LocalMAC=[LocalMAC], LocalVtepIP=[LocalVtepIP], RemoteIPAddress=[ConflictIP], RemoteVNIID=[RemoteVniId], RemoteMAC=[RemoteMAC], RemoteVtepIP=[RemoteVtepIP], LocalInterface=[LocalInterface], RemoteInterface=[RemoteInterface])

The device detected an IP address conflict of terminal users.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwHostConflict

Trap OID

1.3.6.1.4.1.2011.5.25.123.2.13

Alarm ID

0x00f1009e

Alarm Type

equipmentAlarm

Raise or Clear

Raise

Match trap

VSTM_1.3.6.1.4.1.2011.5.25.123.2.14 hwEthernetARPHostIPConflictResume

Parameters

Parameter

Description

LocalIPAddress

Conflicted local IP address

LocalVNIID

Local VNI ID

LocalMAC

Local MAC address

LocalVtepIP

Local VTEP IP address

RemoteIPAddress

Conflicted remote IP address

RemoteVNIID

Remote VNI ID

RemoteMAC

Remote MAC address

RemoteVtepIP

Remote VTEP IP address

LocalInterface

Name of the original interface.

  • If the host information learned on the user side conflicts with the host information learned on the tunnel side, this parameter displays the interface name of user side.

  • If the host information learned on the tunnel side conflicts with the host information learned on the user side, this parameter is displayed as a hyphen (-).

  • If the host information learned from the user side conflicts, this parameter displays the interface name from the first user side.

RemoteInterface

Name of the conflicting interface.

  • If the host information learned on the user side conflicts with the host information learned on the tunnel side, this parameter is displayed as a hyphen (-).

  • If the host information learned on the tunnel side conflicts with the host information learned on the user side, this parameter displays the interface name of user side.

  • If the host information learned from the user side conflicts, this parameter displays the interface name from last user side.

VB Parameters

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.335.1.32.1.3

hwEthernetARPHostMAC

hwEthernetARPHostIPAddress

hwEthernetARPGatewayVNIID

1.3.6.1.4.1.2011.5.25.123.1.32.1.4

hwEthernetARPGatewayVtepIP

hwEthernetARPHostIPAddress

hwEthernetARPGatewayVNIID

Impact on the System

Users fail to go online.

Possible Causes

Two terminal users had the same IP address configured.

Procedure

  • Change the IP address of one terminal user to prevent an IP address conflict according to the alarm.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 79753

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next