No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.69 hwMplsDynamicLabelTotalCountExceed

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.69 hwMplsDynamicLabelTotalCountExceed

Description

The dynamic label count reaches the upper limit.( hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount])

Dynamic label usage reached 100%.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsDynamicLabelTotalCountExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.69

Alarm ID

0x00f10033

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear

Parameters

Parameters Description

hwMplsDynamicLabelTotalCount

Total number of dynamic labels

hwMplsDynamicLabelCurrentCount

Number of dynamic labels used

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.3.3

hwMplsDynamicLabelTotalCount

N/A

1.3.6.1.4.1.2011.5.25.121.3.4

hwMplsDynamicLabelCurrentCount

N/A

Impact on the System

All dynamic labels are used, and no subsequent LSPs can be established.

Possible Causes

A great number of LSPs were established, and all dynamic labels were used.

Procedure

  1. Run the display mpls lsp statistics command to view statistics about LDP LSPs, RSVP-TE CR-LSPs, and BGP LSPs. Re-plan the services and delete unwanted LSPs that use dynamic labels. Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear is generated.
    • If this clear alarm is generated, go to step 3.
    • If this clear alarm is not generated, go to step 2.
  2. Collect log messages and Collect alarm information and configuration information, and then contact technical support personnel..
  3. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 79927

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next