No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LACP_1.3.6.1.4.1.2011.5.25.41.3.51 hwLacpPartnerMisconnect

LACP_1.3.6.1.4.1.2011.5.25.41.3.51 hwLacpPartnerMisconnect

Description

The peer link of the LACP member interface might be incorrectly connected.(TrunkIndex=[TrunkIndex], PortIfIndex=[PortIfIndex], TrunkId=[TrunkId], TrunkName=[TrunkName], PortName=[PortName])

The peer link of an Eth-Trunk member interface in LACP mode might be incorrectly connected.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwLacpPartnerMisconnect

Trap OID

1.3.6.1.4.1.2011.5.25.41.3.51

Alarm ID

0x09362011

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

LACP_1.3.6.1.4.1.2011.5.25.41.3.52_hwLacpPartnerMisconnectResume

Parameters

Parameter

Description

TrunkIndex

Trunk index

PortIfIndex

Index of a trunk member interface

TrunkId

ID of a trunk interface

TrunkName

Name of a trunk interface

PortName

Name of a trunk member interface

VB Parameters

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2

hwTrunkIfID

hwTrunkIndex

1.3.6.1.2.1.31.1.1.1.1

ifName

ifIndex

1.3.6.1.2.1.31.1.1.1.1

ifName

ifIndex

Impact on the System

User services are interrupted.

Possible Causes

The system ID and key of the peer member interface of the Eth-Trunk member interface in LACP mode differed from those of the current working interface and could not be negotiated.

Procedure

  1. Check whether the peer link is incorrectly connected and added to an incorrect link aggregation group. If the peer link is incorrectly connected, go to Step 2.
  2. Correctly configure the link aggregation group at the peer end, and then check whether the trap message is cleared. If the trap message persists, go to Step 3.
  3. Collect alarm information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 68040

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next