No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

Description

The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[MplsResourceType], hwMplsResourceCurrentCount=[ResourceCurrentCount], hwMplsResourceThreshold=[ResourceThreshold], hwMplsResourceTotalCount=[ResourceTotalCount])

The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsResourceThresholdExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.71

Alarm ID

0x00f10010

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.72 hwMplsResourceThresholdExceedClear

Parameters

Parameters Description

hwMplsResourceType

Type of MPLS resource

hwMplsResourceCurrentCount

Number of available MPLS resources

hwMplsResourceThreshold

Upper alarm threshold for MPLS resource usage

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.11

hwMplsResourceType

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.12

hwMplsResourceCurrentCount

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.13

hwMplsResourceThreshold

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.14

hwMplsResourceTotalCount

N/A

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has exceeded the upper threshold, services may be affected.

Possible Causes

The number of MPLS resources of a specific type reached the upper threshold.

Procedure

  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Check whether hwMplsResourceThreshold is set in a specified range.
    • If the value is within the specified range, go to Step 4.
    • If the value is out of the specified range, go to Step 3.
  3. Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 4.
  4. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 5.
  5. Contact technical support personnel.
  6. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 68116

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next