No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 12800 and 12800E V200R005C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP_1.3.6.1.4.1.2011.5.25.165.2.2.2.7 hwArpVlanSpeedLimitALarm

ARP_1.3.6.1.4.1.2011.5.25.165.2.2.2.7 hwArpVlanSpeedLimitALarm

Description

The VLAN's ARP packet speed exceeded the configured speed limit value. (SuppressValue=[SpeedLmtValue], Vlan=[VlanId])

The transmit rate of ARP packets in a VLAN exceeded the configured rate limit in the VLAN.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwArpVlanSpeedLimitALarm

Trap OID

1.3.6.1.4.1.2011.5.25.165.2.2.2.7

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter

Description

SuppressValue

Rate limit of ARP packets in a VLAN

Vlan

VLAN in which rate limit is configured for ARP packets

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.165.2.1.2.7

hwArpsAlarmThreshold

N/A

1.3.6.1.4.1.2011.5.25.165.2.1.2.4

hwArpsPVlan

N/A

Impact on the System

If the trap is generated, the transmit rate of ARP packets in a specified VLAN exceeds the configured rate limit. As a result, some ARP packets are discarded and traffic cannot be forwarded normally.

Possible Causes

The transmit rate of ARP packets in a specified VLAN exceeded the configured rate limit.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039527

Views: 74359

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next